Disabling route to a reachable station

Disabling route to a reachable station

You can disable a particular system indexing route to a reachable station if needed.

Prerequisites:

You have an open connection to a properly licensed Supervisor station (via Workbench or browser)
The Supervisor station has established connections to subordinate stations in the NiagaraNetwork and you have discovered reachable stations (see Viewing reachable stations).
The Supervisor and mid-tier stations are upgraded to Niagara 4.13 or later and have enabled virtuals along the reachable station routes.

Possible use cases can be as follows:

You have a particular reachable station that you want to exclude from system indexing.
You have multiple downstream routes to a particular reachable station, and you want to always use a particular route and disable other routes instead of letting Niagara choose an optimal route on-the-fly.

Perform the following steps:

To disable a route to a reachable station, on your Supervisor navigate to the station that starts the route to the target reachable station, which is to be disabled, expand SysDef and double-click Reachable Stations.
Navigate to the property sheet of the reachable station for which you wish to disable the route, set Route Enabled to false and click Save.