entsec-SecurityLogHistory (Security history Consolidator)
When enabled, this buffered history (LogHistory) component keeps a history of log records seen in the station’s standard output.
This can be very helpful when you are troubleshooting problems with a station. Check the log history for recent error messages.
Figure 20. Log History properties
To access these properties, expand in Nav tree, right-click Log History and click .
In addition to the standard properties (Enabled). This property is unique to this service:
| Property | Value | Description |
|---|---|---|
| Report Type | drop-down list | Selects how much data to report.
|
| History Record Type | read-only | Reports the type of record. |
| Device Pattern | text (defaults to *) | Configures a string that matches the device names from station(s) that are exporting histories The default matches all station names. |
| History Name Pattern | text (defaults to the wildcard *) | Configures a string that matches the names of histories being exported. The default matches all history names.
NOTE: Both
Device Pattern and History Name Pattern must apply for the rule to be used—otherwise the software evaluates the next rule down (in order) for History Policies.
|
| Include Local Histories | true (default) or false |
Includes (true) and excludes (false) histories from the local station.
|
| Include Remote History Exports | true (default) or false |
Includes (true) and excludes (false) histories exported from remote stations.
|
| Data Expiration | days, hrs, mins, seconds | Configures when the data expire. |
| Auto Purge | additional Time Trigger properties | Executes an action at configured times.
Getting Started with Niagara documents control—TimeTrigger properties. In this case, the action is to automatically purge audit records. |
| Min Local Consolidate Time | hours minutes seconds | Configures a minimum time for the Supervisor station to consolidate input from the remote controller stations. |
| Last Success | read-only | Reports the last time the job succeeded. |
| Last Failure | read-only | Reports the last time the job failed. |
| Last Fault Cause | read-only | Reports the cause for the most recent job failure. |
| Consolidation Disabled | true (defaults) or false |
Enables (true) and disables (false) intrusion record consolidation in the Supervisor station. The Supervisor station can consolidate data from all remote stations
configured for an intrusion keypad.
|
| Default Local History | filter mask (defaults to wildcard *) | Enables (true) and disables (false) intrusion record consolidation in the Supervisor station. The Supervisor station can consolidate data from all remote stations
configured for an intrusion keypad.
|
| Log History | additional properties | Sets up a query to customize the history report. |