accessDriver-AccessRex
Figure 80. Exit Request properties
To access this component, expand the , and double-click the Exit Request node in the Nav tree.
In addition to the standard properties (Facets), these unique properties support this component:
| Property | Value | Description |
|---|---|---|
| Request-to-Exit Input | additional properties | This proxy extension component is documented in a separate topic. |
| Status | read-only | Indicates the current state of the sensor (Active or Inactive), and its status {ok}, or other possibilities.
|
| Inhibit Sensor | read-only true or false |
Indicates what happens to a door-forced-open alarm during an exit request.
|
| Enabled Schedule | null, true (default) or false |
Indicates if a schedule exists.When null is enabled, reports the incoming value from the device. You cannot change this value.
To change this value, click the double-arrow to the right and remove the null check mark. |
| Unlock on Exit Request | yes or no (default)
|
Allows an exit request to unlock a door. |
| Exit Request Timeout | None or hours minutes seconds (defaults to 30 seconds)
|
Configures an amount of time for the person who requested an exit to pass through the door before the door locks again.This component is documented in a separate topic. |
| Exit Request Timeout Relock | true (default) or false |
Configures whether or not the door locks after the exit request timeout. |
| Exit Request Timeout Alarm Ext | additional properties | This alarm-source-extension component is documented in a separate topic. |
| Supervisor Fault Settings | additional properties | This alarm-source-extension component is documented in a separate topic. |
| outOfSericeExt | BACnet extension | This out-of-service component is documented in a separate topic. |