accessDriver-AccessReader

This component configures an access reader.

Figure 79. Access Reader properties

You add this component to the AccessNetwork node in the station from the accessDriver palette. Once in the station, double-click this AccessReader node to view its properties.

In addition to the standard properties (Status, Fault Cause, and Enabled), these properties support this component:

Property	Value	Description
Reader Config	additional properties	Sets up the required hardware to validate an entry request, as well as a request to arm or disarm an intrusion zone.
Threat Level Group	read-only	Reports the currently-assigned threat level group.
Elevated Threat Level	drop-down list	Defines a threat level for changing the reader configuration. The default ignores any active threat level changes.
Elevated Threat Reader Config	drop-down list	Specifies a reader configuration to enable when the active threat level matches or exceeds the `Elevated Threat Level`.
Current Badge Read	read-only	Reports the number of the badge being processed now.
Last Badge Read	read-only	Reports the number of the last-read badge.
Last Badge Activity	read-only	Reports the last read or write using a badge.
Last Person Name	read-only	Reports the owner of the last badge read.
Last Person Id	read-only	Reports the ID of the owner of the last badge read.
Last Location Id	proxy extension	This is a standard Numeric Writable proxy extension.
Validate Time	read-only seconds	Reports the time taken to validate the badge.
Validate Timestamp	read-only	Reports when the system validated the badge.
Valid Badge Latched	read-only true or false	Indicates if the badge successfully latched the door.
Valid Badge	additional properties	This is a standard Boolean Writable component.
Invalid Badge	additional properties	This is a standard Boolean Writable component.
Time Attend	drop-down list	`None` `Clock In` `Clock Out`
Green	additional properties	This is a standard Boolean Writable component.
Red	additional properties	This is a standard Boolean Writable component.
Beeper	additional properties	This is a standard Boolean Writable component.
Instance	read-only	Reports the current number.
Alarm On Failed Validation	`true` (default) or `false`	Configures the driver to generate an alarm if account validation fails.
Assignment	read-only
Diagnostic Mode	`true` or `false` (default)	Enables and disables the ability to see the keypad PIN. `true` displays the PIN so that the super user, who is configuring the reader, can confirm that the correct PIN was entered during testing. `false` hides the PIN. This is the obvious setting for normal operations.
Alarm Info	additional properties	Standard alarm-AlarmSourceInfo component.
Activity alert extensions	additional properties	Standard accessDriver-ActivityAlertExt. Each has the same set of alarm source info.

accessDriver-AccessReader

Figure 79. Access Reader properties

Related Links