accessDriver-AccessElevator
This component configures elevator properties.
Figure 72. Elevator properties
You add this component to the AccessNetwork node in the station from the accessDriver palette. Once in the station, double-click this node to view its properties.
In addition to the standard property, Status, these properties configure this component.
| Property | Value | Description |
|---|---|---|
| Floor Enabled Time | hours minutes seconds (defaults to 5 seconds) | Sets the amount of time that the elevator floor button is active after access is granted to the floor. |
| Floor Selected Input | read-only unless null is disabled
|
When null is enabled, reports the incoming value from the device. You cannot change this value.
To change this value, click the double-arrow to the right and remove the null check mark. |