ResistiveInputPoint

A ResistiveInputPoint is a NumericPoint with NdioResistiveInputProxyExt. It configures a UI to read a resistance from 0 to 100,000 ohms. Configuration provides for default (ohms).

If a linear-responding device and other units are needed, select Conversion type Linear—see Scale and offset calculation (linear).
If a non-linear device and other units are needed, if the JACE is running AX-3.4 (with kitIo module installed), select Conversion type Generic Tabular—see Non-linear sensor support.

Note If using a thermistor temperature sensor, see ThermistorInputPoint.

The ResistiveInputPoint is pre-configured with a linearCalibration extension, to allow for offset correction. For details, see Linear Calibration Ext.

Figure 18. Ndio Resistive Input Point

The ResistiveInputPoint’s Proxy Ext contains only common Ndio Proxy Ext properties. Among these, note that the read-only “Device Facets” property is preset to ohms.