Ndio Board Manager

As the default NdioNetwork view, the Ndio Board Manager has an online “Learn Mode” to find I/O modules attached (and/or integral) to the host JACE (Figure 4). You use this view to discover and add one or more “device-level” NdioBoard components to the station database (Figure 5). For general information, refer to “About the Device Manager” in the Drivers Guide.

Figure 4. Adding NdioBoard discovered using Ndio Board Manager

Figure 5. Add dialog for NdioBoard(s)

After adding all discovered NdioBoard(s), you use the Ndio Point Manager view of each NdioBoard to add Ndio proxy points—one for each available I/O hardware point (terminal address).

Ndio Board Manager usage notes