| Parent Component Slot Path |
Yes |
The location in the target station (slot path in
Workbench terms) of the device. Include no starting or ending slashes (/) in the entered value, for example: Folder1/Folder2/Folder3 |
| Deployed Name |
Yes |
The name of the device. For example, AHU_1 |
| Display Name |
No |
A more user-friendly name than the deployed name, for example, Air Handler Unit 1 |
| Position |
No |
The deployed component's position on the Wire Sheet. Specifies the position as h,v or h,v,w where h, v, and w are numbers
that represents the horizontal, vertical position, and width respectively.
|
| Unique Device |
No |
The station name or IP address value. This row only applies to a matching station when a provisioning job deploys a bulk template
to multiple stations. This value is ignored for template bulk deployment to a single station.
|
| Enable Histories |
No |
Enables and disables all history extensions in the deployed template whose Enabled property is not already configured in the template.
|