Prerequisites: You have installed
Niagara and commissioned the controller with up-to-date core software.
- Start the controller.
- Make a serial connection from your PC to controller’s Debug serial port.
- Run the shell command to display ATLAS System Shell using the controller’s platform credentials.
ATLAS System Shell
-------------------------------------------------------------------------
hostid: ATLAS-SD-F93E-14C2-6345-D321
serial number: 0
system time: Tue May 2 14:17:37 EDT 2023
niagara daemon port: https 5011
en0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group
default qlen 1000
link/ether 00:01:f0:96:41:8d brd ff:ff:ff:ff:ff:ff
inet 172.31.67.86/22 brd 172.31.67.255 scope global noprefixroute en0
valid_lft forever preferred_lft forever
inet6 fe80::201:f0ff:fe96:418d/64 scope link
valid_lft forever preferred_lft forever
en1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN
group default qlen 1000
link/ether 00:01:f0:96:41:8c brd ff:ff:ff:ff:ff:ff
-------------------------------------------------------------------------
1 Update System Time
2 Update Network Settings
3 Ping Host
4 System Diagnostic Options
5 Change Current User Password
6 Change System Passphrase
7 Create SD Backup
8 Restore SD Backup
9 Reboot
L Logout
Enter Choice : 7
- To start the manual backup , enter option no 7
Create SD Backup.The shell prompts you to confirm this action.
Do you want to start backup now? [y/N]? y
- To start the backup, type y.
The backup procedure starts and, when finished, displays “Backup Successful.”
Backup Started,
Please wait for backup to complete...
Backup Successful