lonIp-IpLonNetworkConfig
This component is one of two frozen containers under an Ip Channel component of a LonIpNetwork. It contains properties that specify the CEA-852 IP Configuration Server (Config Server) and the software ports used.
NOTE: The
Config Server property defaults to false. To configure the controller station to function as a configuration server, set this property to true.
Figure 45. Ip Lon Network Config properties
The screen capture shows two versions of this AX Property Sheet. When Is Config Server is true, there is no need to define the Config Server Ip, which is only available when Is Config Server is set to false.
To access this view expand, and double-click Network Config.
| Property | Value | Description |
|---|---|---|
| Is Config Server | true (default) or false |
Determines how to populate the Ip Channel table after you add a device to the Config Server and the station contacts the server
(the station becomes a member of the CEA-852 channel).
|
| Rcv Port | number between 0 and 65535 (defaults to 1628) | Configures the port to receive data. |
Config Server Ip (appears when Is Config Server is false)
|
IP address | Defines the IP address of the third-party Config Server. |
| Config Server Port | number between 0 and 65535 (defaults to 1629) | Identifies the port used by the server. |
| Net Name | text | Configures the network name. |
| Use Extended Nat | true or false (default)
|
Enables NAT (Network Address Translation). |
| Adapter | drop-down list | Provides the name for the network adapter. |
| My Ip Address | read-only | Reports the IP address of the platform. |
| Nat Ip Address | IP address (defaults to 0.0.0.0) |
Defines the device’s assigned external (Internet) address if the device is behind a NAT (Network Address Translation) router.
If not, leave this property at its default value.
|