Index | Prev | Next

Stopping the platform daemon

This procedure describes commands to stop the Linux N4Supervisor and to verify that it is not running.
 NOTE: You rarely stop the platform daemon (and station) on any N4Supervisor, except immediately before installing a new point release (an upgrade). 
Perform the following steps:
  1. At the command line, type the following to stop the platform daemon.
    <user>@<host>:/usr/bin# niagaradctl stop

    Stopping Niagara Daemon: [ OK ]
  2. Type the following at the command line to verify that the daemon has stopped:
    <user>@<host>:/usr/bin# niagaradctl status

    niagarad is stopped

Related Links

  • Common tasks (Parent Topic)

    • Index | Prev | Next