email-EmailAlarmAcknowledger
The EmailAlarmAcknowledger component provides a way to acknowledge alarms by sending an email reply to an email alarm notification. This component is
available in the email palette and works with alarm notifications that are sent out using the OnCallService or directly from the EmailService.
| Property | Value | Description |
|---|---|---|
| Status | read-only |
Reports the condition of the entity or process at last polling.
|
| Enabled | true or false |
Activates (
true) and deactivates (false) use of the object (network, device, point, component, table, schedule, descriptor, etc.).
|
| Ack Alarms From Same Source | drop-down list | true acknowledges the current and all previous alarms from this source with a single email reply. For example, a single control
point may go in and out of alarm repeatedly generating 23 unacknowledged alarms reported and displayed in the alarm console.
With this property set to true, a single email acknowledgment can acknowledge all 23 alarms.
|
| Last Alarm Acked | read-only text | Displays the identity of the last alarm that was acknowledged. |
| Last Alarm Acked Time | read-only time | Displays the identity of the last alarm that was acknowledged. |
| Last Alarm Acked Failure Time | read-only time | If an attempt to acknowledge an alarm failed, a message with the time of the last failure displays. |
| Last Alarm Acked Failure Cause | read-only text | If there has been a failure in the attempt to acknowledge an alarm, this field displays a message indicating the possible reason for the last failure. |
| Total Alarms Acked Today | read-only number | Displays the current number of alarms that have been acknowledged for the day. This number is reset to zero at midnight. |
| Total Messages Received Today | read-only number | Displays the current number of email messages that have been received for the day. This number is reset to zero at midnight. |