alarm-AlarmService

alarm-AlarmService

This component uses AlarmClasses to route all alarm messages between AlarmSources and AlarmRecipients. Each station contains a single AlarmService, which is available in the alarm palette.

Property	Value	Description
Status	read-only	Reports the condition of the entity or process at last polling. `{ok}` indicates that the component is licensed and polling successfully. `{down}` indicates that the last check was unsuccessful, perhaps because of an incorrect property, or possibly loss of network connection. `{disabled}` indicates that the `Enable` property is set to `false`. `{fault}` indicates another problem. Refer to `Fault Cause` for more information.
Fault Cause	read-only	Indicates the reason why a system object (network, device, component, extension, etc.) is not working (in fault). This property is empty unless a fault exists.
Enabled	`true` or `false`	Activates (`true`) and deactivates (`false`) use of the object (network, device, point, component, table, schedule, descriptor, etc.).
Db Config	additional property	Provides access to database configuration properties. Refer to separate topic, alarm-FileAlarmDbConfig.
Medium	additional properties	Defines basic alarm properties, reports alarm counts and establishes escalation levels. Refer to separate topic, alarm-AlarmClass.
Master Alarm Instructions	additional properties	Clicking the edit icon (pencil) to the right opens a window for adding and managing alarm instructions. See Master Alarm Instructions.
Console Recipient	console and additional properties	Provides access to console recipient properties. Refer to separate topic, alarm-ConsoleRecipient.

Master Alarm Instructions

Add creates a new instruction.
Remove deletes the selected instruction from the list.
Move Up/Down changes the order of the instructions in the list.