obixDriver-ObixExport
This component is a child of an ObixExportFolder. It is an oBIX server that provides link-write access to remote client control points. While many Framework points allow
oBIX clients to write a value to them (each action appears as an op), anObixExport defines a link to the input property of a specific Framework point, at a particular control level.
Figure 5. Obix Export properties
One way to access these properties is to expand the ObixNetwork and double-click the ObixExport node in the Nav tree.
| Property | Value | Description |
|---|---|---|
| Point | ORD | Defines the location of a control point. Setting this value configures the export automatically. |
| Priority | drop-down list | Defines when to link the control point. When changed, the driver the export object again automatically. |
| Facets | Ref chooser | Defines control point facets. These should always be a copy of the facets of the target control point, which the driver configures automatically. |
| Status | read-only | Reports the health of this manager view. It will only ever be ok or fault and does not affect the value read by oBIX clients.
fault indicates that a point does not reference a control point or that something is already linked into the control point at the
priority level specified in the |
| Fault Reason | read-only |
Explains why an export descriptor is in fault. Typically, this reflects an invalid configuration, such as selecting a
Priority level that is already linked on the target control point.
|
| WritePoint | additional properties | This is for oBIX encoding, and should not be modified. |