Setting up the Visitor Type and Access Right mapping
The
Visitor Type and AccessRight mapping table determine the appropriate access rights and badge details for specified visitor types.
Prerequisites: The Access Rights with proper Schedules that can be assigned to visitors and readers are already defined and
set up in the
Adding Access Rights and configuring schedules
Perform the following steps:
- Navigate to
- Navigate to . Click on the
icon to add a new access right. Give any name to the access right. Add a schedule to the access right. Click on Save.
- Go back to the
- Double-click on VisitorIntegrationService to open the AX Property Sheet and click Refresh.
- To add a new visitor, click New on the Visitor Type and AccessRight mapping property.
- Configure all the properties and Click OK.
- Visitor Type selects among these types: Visitor, Contractor, Staff, Courier, Others.
- Access Rights selects from a list of rights previously set up in the system.
- Wiegand Format configures the badge layout from the list of previously set up formats.
- Facility Code is based on Wiegand Format.
NOTE: For some common configuration issues and their solutions, refer to VisitorIntegrationService - Configuration Problem Points and Failures.NOTE: If any mapping row has access rights or Wiegand formats that no longer exist in the system or are renamed, that mapping row does not exist.
- To edit the properties, double-click the added mapping row.