Prerequisites

You should provide Sine and station prerequisites before beginning the configuration.

Creating a Sine Pro Account
You should create a Sine Pro account as the first step. Refer to the link for creating a Sine Pro Account Creating Sine Pro account
Creating a site in Sine Pro Dashboard
After logging into the Sine Pro account, you must create a site for the physical location where you intend to use Sine visitor management Refer to Creating a site (Creating a Site).
Enabling the CalbackService for WebHookThe callback Service needs to be enabled so the Niagara station can send a response to Sine when the check-in requests are approved or rejected. To enable the callback service for WebHook, the user must send a request to Sine Team. Follow the below steps to enable the Callback Service:
1. Log in to Sine Pro account.
2. In the Sine Pro dashboard, click on the Chat icon in the bottom right corner of the screen and go to Messages.
3. Click on Send us a message and request the sine team to enable the callbacks and sign in pending for WebHook.
4. Once it's done and confirmed by the Sine Team, you can proceed with the configuration steps.

Adding necessary features and drivers to Niagara Station
The Niagara station has the license for sineVisitorManagement and the MQTT driver. Contact the Tridium team to add these features to your license.
Providing AWS Certificate
The device certificate (AWSCert.crt) must be imported into Niagara station. The device certificate is provided by the system integrator. For the demo purposes, contact the Tridium team.