Assuming your reader has the required features, at a normal threat level a reader can require a reader-only card swipe for
validation. However, at a higher active threat level, a reader may require a card swipe and the entry of a PIN to provide
valid access.
Prerequisites: You are working in the controller station that manages the reader.
- From the main menu, click and double-click the remote module that supports the door device, click the Doors tab, click the door name, and click the
Strike tab.
The Module Setup view opens to the Strike tab.
- Configure the
Elevated Threat Level property to something other than None.Setting this value to None causes the system to ignore the threat level.
- Configure the
Elevated Threat Reader Config property.This tells the system what to enable when the active threat level matches or exceeds the Elevated Threat Level value.