May 29, 2023
- Updated “Communications support between
Niagara 4 and
NiagaraAX” table in Wire Compatibility topic
- Added procedure for “N4 exisitng station” to the “Creating and updating the HSQL database password” topic.
February 6, 2023
Added procedure for “N4 exisitng station” to the “Creating and updating the HSQL database password” topic.
December 10, 2020
Rewrote the last sentence of “Connecting from the Supervisor to the
NiagaraAX-3.8 legacy security station” topic.
November 2, 2020
Combined “Migration workflow diagram” topic with “Migration workflow process” topic and “Migration workflow diagram” topic
deleted from book map.
June 1, 2020
- Edited certificate descriptions and procedures.
- Confirmed upgrade procedures for
Niagara Enterprise Security stations.
- Corrected variables used for document branding.
December 16, 2019
- Edited procedures for exporting certificate key information prior to migration.
- Removed procedure for configuring new Photo ID device in Chapter 5. This information is in the Niagara Enterprise Security Installation and Maintenance Guide.
August 7, 2019
Edited procedures related to migrating
Niagara Enterprise Security stations from
NiagaraAX to
N4.
April 19, 2019
Added two chapters related to station migration and legacy controller connections.
November 13, 2017
Removed a reference to tagged categories from the procedure, “Tips for Configuring oBIX Authentication”.
November 19, 2016
Removed text in “Driver and Application Support” topic indicating
N4 support for video drivers.
May 6, 2016
One change was made in the topic, “File Locations”: in the table under the heading Homes in a Supervisor, corrected the path for the protected_station_home
February 22, 2016
- Added information about setting the configuration flag before migrating users. Changes were made to two topics:
- “Features and compatibility between
N4 and
AX,” and “Assess and prepare for
N4 migration.”
- The following topic was added: “Configuring an
AX station to migrate users”
- Edited the entire document to streamline the way software names are used and to convert task material to task steps.
August 7, 2015
Initial release document.