This program provides a binary result: Failed or Passed. Only hosts that pass can be migrated.
Prerequisites: You have the BOG file with the resource checker program,
Workbench, and can open a station connection (Fox or Foxs) to the host controller.
- Copy the BOG file with the resource checker program component to your
AX-3.8 system home folder.
- Using
Workbench, open the station (Fox or Foxs), and expand Config to find a folder to copy the Program into, or else add a new folder. You can locate it anywhere under Config.
- In the Nav tree, locate the BOG file with the resource checker program (it may be named “
N4UpgradeResourceCheckerV1_n”) and copy it into the station. You should be able to immediately use the program.
- Right-click the program in the station, and select .
After a few seconds, a popup AX to N4 Upgrade Resource Checker window opens with the test results, as either “Passed” or “Failed”.
- Click OK to close the window.