User Sync Manager

Any station's NiagaraNetwork has an available User Sync Manager view. It manages the Users device extension properties for all NiagaraStations in the network.

This view reflects the NiagaraNetwork setup for enabling network users.

Figure 115. User Sync Manager is available view on NiagaraNetwork

To open this view, expand Config > Drivers, right-click the NiagaraNetwork and click Views > User Sync Manager.

For each NiagaraStation in the network, the User Sync Manager shows the current status and configuration property values of the station’s user device extension. The example above, with its configuration of Sync In Enabled and Sync Out Enabled properties, represents a NiagaraNetwork in a Supervisor station, where all child stations are subordinate (remote controller) stations.

Columns

Column	Description
Path	Reports the ORD to the station.
User Station	Reports the name of the station.
Type	Identifies the type of station.
Sync In Enabled	Indicates if synchronization-in is available (true) or not (false).
Sync Out Enabled	Indicates if synchronization-out is available (true) or not (false).
Status	Reports the current status of the station.
Fault Cause	If the station is down or in fault, reports the cause.
Sync Strategy	Reports the value of the Synch Strategy property. Prototype Required or Use Default Prototype.
Sync Required	Indicates if synchronization is required (true) or not (false).
Sync Delay	Reports any delay time in hours, minutes and seconds (defaults to 30 seconds).
Sync Retry	Reports how often synchronization retries in hours, minutes and seconds (defaults to five minutes).
Last Sync Attempt	Reports the last time the framework attempted to synchronize users.
Last Sync Success	Reports the last time the framework successfully synchronized users.

Buttons

Edit opens the device’s database record for updating.
TagIt associates metadata, such as location or unique configuration with the object.
Template Config accesses the station template that defines configuration options. You would select a template to set up the device with pre-configured properties.