Mbus Point Manager
This view manages discovered points.
Figure 7. Mbus Point Manager
| Column | Description |
|---|---|
| Name | Reports the name of the proxy point component. |
| Description | Describes the point. |
| Orthogonal Description | Reports value information provided by the device manufacturer. |
| Function | Reports value information provided by the device manufacturer. |
| Mbus Unit | Reports the unit as defined in the Mbus specification. |
| Exponent | Reports value information provided by the device manufacturer. |
| out | Reports the current value and status of the point. |
| Device Mode | Indicates the message formatting, for example, LSB first or MSB first. |
| Record Number | Reports how many linked messages to accept for this point in a sequence of linked messages. |
| Cycle Number | Increments each time a point receives a new message. |
| Facets | Reports the terms configured for the device. |
| Storage Number | Reports value information provided by the device manufacturer for this hidden slot. |
| Tuning Policy Name | Reports the tuning policy for the point. |
| Conversion | Reports the unit used to convert the point value. |
| Fault Cause | Reports why a point is in fault. |
| Path | Reports the ORD that identifies the location of the point in the station. |
| Type | Identifies the type of point. |
| Enabled | Indicates if the point is functional. |
| Number type | Reports the type of number for the input. Refer to the manufacturer's documentation. |
| Message Slot Number | Refer to the manufacturer's documentation. |