Each device must have a unique primary address. The discovery wizard under the network determines each slave device’s primary
address. This procedure assigns a new primary address to a device for which the current address is zero (0), or the current
address is not unique.
Prerequisites: The Mbus components are installed under the Drivers container.
- Connect the slave device to the network as the only device (point-to-point).
- In
Workbench, discover or add the device.
- Right click on the device and click .
The system prompts you to confirm.
- Click Yes, assign the address, and click OK.
The new address appears under the Primary Address column in the table.