Discovering points

This procedure explains how to discover the points associated with each meter device.

Prerequisites: Devices have been detected and discovered.

Perform the following steps:

Double-click on the Points folder under the required device in the Nav tree.
The Database pane of the Mbus Point Manager view opens showing all current points.
Click the Discover button.
The Discover button opens the Point Discovery Wizard, which scans the network database or scans the device directly. Scanning the database is quicker, but may be incomplete. After the scan, the Discovered pane lists the discovered points.
The Description identifies each point. The Orthogonal Description (additional description) is defined by the EN13757 standard.
Select the required point(s) in the Discovered pane and either drag them to the Database pane or select them and click Add.
To edit point properties, select the point and click the Edit button.