Double-click a ScheduleImportTag for its property sheet (Figure 42).
ScheduleImportTag properties are described as follows:
Status
Read-only status of the export tag, typically “ok”, unless “disabled” (Enabled=false).
Enabled
Whether the tag will attempt an export on the next Join (true, the default) or not (false).
Supervisor Station
Click the drop-down
control to select the NiagaraStation that represents the Supervisor (with enabled JoinProfile).
After selection, you must before you can use the
folder (Select Parent Target) feature of the next property. Also, add
(and delete
) controls exist to specify more than one Supervisor station; however, this configuration is rarely expected.
Station Slot Path
Parent slot path for the slave schedule on the Supervisor, read-only and fixed as the schedules slot (Schedules extension) of the NiagaraStation that represent this subordinate (JACE) station.
Execution Time
Execution time selections for the NiagaraScheduleImport descriptor that results on the Supervisor, where the default is Manual. Other selections include Daily or Interval, where each has a number of selectable parameters.
Note that by default, the corresponding NiagaraScheduleExport descriptor created on the local subordinate (JACE) station has
an Execution Time of Interval, at every 5 minutes.