Outputs report and Filter window
This report lists the outputs identified when the system discovers each parent device or module and adds it to the system
network. Outputs include strikes, relays, alarms, lights on/off, heater on/off, and air conditioner on/off.
Figure 94. Outputs report
This report opens when you click .
Outputs report columns
| Column/criterion | Description |
|---|---|
| Station Name | Displays data, and selects data to view based on the name of the managing station. |
| Description | Displays data, and selects data to view based on any description associated with the output. |
| Termination | Displays data and selects data to view based on the numbered terminal point that the output is assigned to. This may be especially helpful when the display name (shown in the Description column) is renamed. |
| Module | Displays data, and selects data to view based on the controller module associated with the output. |
| Status | Displays data and selects data to view based on output status: : inactive/Inactive, Closed, Opened, Locked, Off, etc. |