Strike tab

This tab configures the unlocking and locking of the door. Door options work in conjunction with the selected Unlock Schedule.

Figure 166. Strike tab

To access this tab, under the Controller Setup menu, select Remote Devices > Remote Modules > Remote Module Setup and double-click the door device (module), click the door name, and click the Strike tab.

Property	Value	Description
Locked State	`Open` or `Closed`	Defines the position of the lock associated with the `Door Lock Output` property.
Status	read-only	Indicates the current strike state (Locked, Unlocked, and status {ok}, or other possibilities.)
Auto Relock	drop-down list	Defines what should happen with a door that has just been unlocked. `Unlock Time` permits the door to remain unlocked for the amount of time defined by `Access Unlock Time`. `Relock On Door Open` locks the door as soon at it unlocks. `Relock On Door Close` locks the door either after the `Access Unlock Time` expires (if the door has been unlocked, but not opened) or when the door closes.
Schedule Operation	drop-down list	Specifies when to set the strike status. All options work with the selected unlock schedule. If no schedule is selected, (property set to none), none of the options are available for specifying how to set the strike status. `Normal` follows the schedule defined by the `Unlock Schedule` property. `Unlock on first validation` causes the strike to unlock (if access is granted) and remain unlocked after the first time access is granted within the scheduled open time. If access is granted outside of the scheduled open time, an unlock-on-first-validation is not performed. `Unlock and Relock` alternately unlocks and re-locks with each card swipe. `Follow Another Strike` opens a Ref Chooser used to select a module and door strike to follow. Door status reflects the status of the strike to follow. Choosing this option, when the schedule is true, inhibits the door force alarm without waiting for the door to follow to have its strike enabled.
Unlock Schedule	Ref Chooser	Selects a schedule to indicate when a door should be unlocked. `None` disables all strike properties. If no schedules appear in the Ref Chooser, none may have been created yet.
Override Schedule	Ref Chooser	Selects a schedule to temporarily unlock and lock the door using a higher priority level than the level assigned to the `Unlock Schedule`. This sets up an exception to the regular `Unlock Schedule`.
Access Unlock Time	minutes and seconds (1 second to 59 minutes)	Defines the length of time that a door may remain unlocked after access is granted. Values are only used when `Auto Relock` is set to `Unlock Time`.
Log Exit Requests	drop-down list (defaults to None)	Defines the conditions under which to initiate a log entry associated only with an exit request at the selected door. `None` disables exit request logging. `Unlocked` creates a record any time the door is unlocked. `Opened` creates a record any time that the door is opened. `Unlocked or Opened` creates a record any time the door is unlocked or opened.
Log Schedule Activity	`true` (default) or `false`	Manages the log for a scheduled activity. `true` creates a record any time a schedule controls activity at this door. The record may be displayed in the Access History report. `false` disables the recording of scheduled activity.
Threat Level Group	Ref Chooser	Assigns an optional Threat Level Group to the strike. When assigned, two additional properties display.
Schedule Lockdown Threat Level (Appears when you assign a `Threat Level Group` to the strike.)	drop-down list (defaults to `None`)	Specifies a threat level that keeps the door locked no matter what the state of the associated schedule is. The default sets the door to follow the associated schedule without regard to the active threat level. A value other than the default (`Low`, `Normal` or `High`) keeps the door locked as long as the active threat level is at or above that specified here. This value must be greater threat than the value specified in the `Unlock Threat Level`. If not, the system displays a warning message next to the property when you try to save.
Unlock Threat Level (Appears when you assign a `Threat Level Group` to the strike.)	drop-down list (defaults to `None`)	Specifies a threat level that keeps the door unlocked, no matter what the state of the associated schedule is. The default follows the associated schedule without regard to the active threat level. A value other than the default (that is, `Low`, `Normal` or `High`) keeps the door unlocked as long as the active threat level is at or below the level specified here. The value of the `Schedule Lockdown Threat Level` must be a greater threat level than the value specified by this property, otherwise, a warning message displays when you try to save changes.
Door Lock Output (Appears when you assign a `Threat Level Group` to the strike.)	drop-down list	Defines the relay output control the strike lock action.

Strike tab

Figure 166. Strike tab

Related Links