Access Network view and tab
This view displays values that apply to all devices assigned to the access network.
Figure 187. Access Network view
This view opens when you click the Access Network Setup menu item under the.
Clicking the Save button applies any changes.
Properties
In addition to the standard properties (Status, Enabled, Fault Cause, and Health), these properties support access networks.
| Property | Value | Description |
|---|---|---|
| Validation Timeout | minutes and seconds | Defines the maximum time allowed to receive a badge validation. If validation fails to occur within this time, the system
may generate a validation-timeout-expired alarm.
NOTE: A validation timeout alarm may be caused if a validation cache fault occurs, or if the cache is still initializing.
|
| Show Results Time | minutes and seconds | Defines the time that the (normally false) valid or invalid status remains true after a card is swiped.
|
| Keypad Entry Time | minutes and seconds | Specifies a maximum amount of time after a badge swipe that is allowed before keypad entry must be completed. |
| Cut Value | voltage (V) | Defines a value for the cut voltage parameter on the network.
|
| Open Value | voltage (V) | Defines a value for the open voltage parameter on the network.
|
| Closed Value | voltage (V) | Defines a value for the closed voltage parameter on the network.
|
| Alarm Source Info | Ref Chooser | Expands to display alarm class properties, which are documented in the “System Setup-Alarm Setup” chapter. |