Relay Out tab

Each door may have one or more additional output relay devices assigned. This tab opens for each output relay device that is added.

Property	Value	Description
Status	read-only	Reports the condition of the entity or process at last polling. `{ok}` indicates that the component is licensed and polling successfully. `{down}` indicates that the last check was unsuccessful, perhaps because of an incorrect property, or possibly loss of network connection. `{disabled}` indicates that the `Enable` property is set to `false`. `{fault}` indicates another problem. Refer to `Fault Cause` for more information.
Relay Out	Ref Chooser	Defines which output this relay is connected to by choosing an output (for example, a Strike) from the Ref Chooser window. The system automatically populates this window with the available inputs.
Assignment	Ref Chooser	Defines which input this relay is connected to by choosing an input from the window. This window is automatically populated with the available inputs.
Relay Type	drop-down list	Defines how the relay out behaves relative to the assigned input. You can toggle relay settings on and off or the relay may be out of phase (inverse) with the assigned input. `Follow` matches the state of the assigned input. `Inverse` selects the relay out status that is the opposite of the assigned input state. `Toggle on active` changes the relay from its current state when the assigned input state changes to active. `Toggle on inactive` changes the relay from its current state when the assigned input state changes to inactive.