Modules tab
The device modules tabs include the Base Reader Module, Remote Reader Module, and Input/Output Module tabs. These configure
components added to a controller for the purpose of connecting card readers and other input and output modules.
Each module has a setup view for listing and editing the configuration of the hardware modules.
Figure 158. Remote Reader Module tab
You access a module tab from the main menu by clicking followed by creating a new device or double-clicking a selected row in the table. Double-clicking a module row opens a slightly different set of tabs for each module:
- A Base Reader Module opens these tabs: Base Reader Module, Doors, Elevators, Additional Points and Burglar Panels.
- A Remote Reader Module opens these tabs: Remote Reader Module, Doors and Additional Points
- An Input/Output Module opens these tabs: Input/Output Module and Additional Points.
Properties
In addition to the standard properties (Status, and Enabled) this property and button supports a remote reader module.
| Property | Value | Description |
|---|---|---|
| Alarm Class | text |
Defines alarm routing options and priorities. Typical alarm classes include
High, Medium and Low. An alarm class of Low might send an email message, while an alarm class of High might trigger a text message to the department manager.
|
| Video Setup button | additional properties |
Opens the Video Setup window, which selects, enables and configures a video camera to associate with the alarm point or device.
|