Graphic Editor pop-up menu - available video cameras
This popup (right-click) menu includes context-sensitive menu items.
Figure 369. Graphic Editor popup menu - available video cameras
Figure 370. New menu items
| Menu item | Description |
|---|---|
| Blank Labels | Selects a standard Px label widget, which you use to annotate the graphic. |
| Base Reader Module, Remote Reader Module | These menus are context sensitive and list widgets that represent the devices available under each module. Adding one to the graphic adds a representation of the device to the graphic. |
| Video Cameras | This list of widgets represents the camera(s) connected to your Supervisor PC or subordinate controller. Each widget is labeled in the menu to indicate that the device it represents is either used to play back prerecorded video or to display live video. The playback icon also identifies playback widgets in the menu. |
| Video Px Widgets | A Supervisor station can support local or remote video graphics (using Px) and have them served by cameras that are attached to remote stations under the Supervisor’s NiagaraNetwork. The following Px widgets support remote video:Live Video PlayerControl PanelPan Tilt JoystickZoom SliderCamera WidgetMouse Down WidgetVideo Multistream Pane |
Refer to the “Video installation” chapter in the Niagara Enterprise Security Installation and Maintenance Guide for more about video devices and video.
Example: new Base Reader
The following is an example of the popup menu, Base Reader menu items.
Figure 371. Graphics Editor popup menus
NOTE: If you add a door that is in an alarm condition, by default, the door blinks until the door is out of alarm and the alarm
is acknowledged.