Manual Override window
This window selects an option for manually arming or disarming an intrusion zone.
Figure 282. Manual Override window
The window opens when you click the Manual Override button on the edit intrusion zone view.
Manual Override options
| Option | Description |
|---|---|
| Arm with time delay | Arms the intrusion zone using the time delay set in the Time Delay field. The zone does not alarm if there are any open alarms in the zone. |
| Force Arm | Arms the intrusion zone immediately with no time delay and regardless whether or not there open alarms in the intrusion zone. |
| Force arm with time delay | Arms the intrusion zone using the time delay set in the Time Delay field. Open alarms in the zone do not prevent force arming. |
| Arming Test | Checks for points in an active alarm state before arming the intrusion zone. You cannot arm an intrusion zone that has points
in an active alarm state. The test reports that the zone is ready to arm, or it displays a list of points that are in alarm.
NOTE: Make sure that the request-to-exit properties on all doors in an intrusion zone are inactive before initiating the arming
test. An active request to exit inhibits the associated door sensor and, allowing the sensor to bypass the test.
|