Index | Prev | Next

Axis Cameras tab

This view discovers and configures an Axis camera.
Figure 229.   Axis Video Network, Cameras tab
Image

You access this tab from the main menu by clicking Controller Setup > Remote Devices > Remote Drivers followed by double-clicking the Axis Video Network row in the table, and clicking the Cameras tab.

Buttons

In addition to the common control buttons (Discover, New, Edit Delete, Hyperlink, Filter, Refresh, Export and Learn Mode), these buttons provide camera functions:

  • Image or Image Ping (or wink) sends a command to the remote device or server.
  • Image Preferences opens a Preferences window with common configuration properties.

Columns

Column Description
Display Name Reports the camera name.
Description Provides additional information.
URL Address Identifies the camera’s address, usually the IP address.
Web Port Reports the port used to communicate with the camera feed over the Internet. Port 433 is secure; 80 is not.
Status Reports the condition of the entity or process at last polling.

{ok} indicates that the component is licensed and polling successfully.

{down} indicates that the last check was unsuccessful, perhaps because of an incorrect property, or possibly loss of network connection.

{disabled} indicates that the Enable property is set to false.

{fault} indicates another problem. Refer to Fault Cause for more information.

Related Links

  • Video camera views (Parent Topic)

    • Index | Prev | Next