seriesTransform-TimeShiftNode

The Transform node adjusts the timestamp values that are resolved into a series transform table. The Time Shift node component is available on the Series Transform palette.

Figure 52. Set the time shift value in the TimeShift window

To use the TimeShift node, drag it from the Series Transform palette onto the Wire Sheet view and connect a HistorySource output to the TimeShift Inputs slot. Double-click on the TimeShift component in the Wire Sheet view and set the desired time shift value in the TimeShift window.

Connect the output from the TimeShift node to another SeriesTransform input or directly to a Terminal Node input as desired.

Figure 53. TimeSheet node on Wire Sheet

Resolve the graph and check that the table displays time values that are offset by the value you set in your TimeShift window. So, for example, if you shifted your time by setting a 30-minute value in the TimeShift window, history records that start at 15:30 hrs in the actual point history table should be offset by 30 minutes (16:00 hrs) in the resolved graph table.

The TimeShift node works with the following data types:

Numeric Points
Boolean Points
Enum Points
String Points
- CoV Type histories
- Interval type histories