Setting up the oBIX user

This user configures credentials that permit the EntsecAsureID to access the Obix Network.

Prerequisites: You are using the web UI and are connected to the Supervisor station.

From the main menu, navigate to System Setup > User Management and click Users.
The User Management view opens.
To create the user, click the Add button ().
The New User view opens.
Enter the User Name, which is just below the Save button.
Use the name you planned. If you are upgrading from AX, the migration tool may have created and configured a user for you with the name obix.
To set up the credentials for accessing the oBIX network, enter a password that meets N4 standards and an Authentication Scheme Name of HTTPBasicScheme.
New users default to the DigestScheme, which does not work for machine-to-machine users.
NOTE: If the HTTPBasicScheme is not available, use Workbench to add it to your installation. Refer to “Setting up the authentication scheme for Asure Id and Easy Lobby” in this document.
To assign the Photo ID role to this user, click the Roles tab, click the Assign Mode button (), select the role in the Unassigned pane, click the Assign button (), and click Save.
If needed, make a note of the User name and Password so that later you can enter them in the Settings window of the EntsecAsureID application.