Setting up an intrusion PIN
You may use a PIN (Personal Identity Number) to arm and disarm an intrusion zone. An associated schedule may determine when
the PIN is valid.
Prerequisites: Using the web UI, you are connected to the Supervisor station.
For a standalone configuration, you create an intrusion PIN in your controller station. For a company-wide configuration,
you should set up intrusion PINs in the Supervisor station.
Perform the following steps:
- Click .
- To add a PIN, click Add (
). - Enter a name for the PIN.This name might identify the intrusion zone.
- Enter the schedule and, if applicable, the tenant.
- Finally, enter the PIN, and click Save.
- If you need multiple PINs, repeat these steps for each PIN.
- To complete the configuration, click Save.