Discovering cameras
This procedure is for discovering cameras when using the web UI.
Prerequisites: The camera(s) is/are connected to a remote controller and are ready to discover. You are using the web UI and
are connected to the station.
- From the main menu, click .The Remote Drivers Manager view opens.
- Do one of the following:
- If you are using the nmilestone driver, double-click the Milestone Network row in the table and click the DVRs tab, and double-click a DVR row in the table.
- If you are using the xprotect driver, double-click the X Protect Management Server row in the table, click the DVRs tab, and double-click the XProtectManagementServer row in the table.
- Click the Cameras tab.
- Click the Discover button (
).The system discovers the cameras. - Select a camera in the Discovered pane, and click the Add button (
).The system adds the discovered camera to the Database pane. - To configure the camera, double-click its row in the table.The Add camera window opens.
These properties depend on the camera. To understand the implications of making changes to camera properties, refer to the documentation for the camera.
- Check the configuration and click Ok.