Index | Prev | Next

Assigning a SmartKey PIN and ID

A unique ID identifies each SmartKey device on the network. Using the SmartKey device itself, you must assign this three-digit ID before you connect the device to the remote controller.
Prerequisites: The SmartKey display/keypad has been installed and powered on.
The first time you use the SmartKey device, it prompts you to define a login PIN. Write down this PIN and keep it in a safe place.
 CAUTION: If you lose this PIN, the SmartKey device must be sent back to the manufacturer. 
Perform the following steps:
  1. On the SmartKey device, press the F2 key.
    The Login screen opens.
  2. Enter the Login PIN number, press the F1 key and select System menu from the display.
    The System menu opens.
  3. Select Set ID and press the F1 key.
    The Input screen opens.

    SmartKey intrusion keypads ship with a default ID (address) of 1. To connect more than one keypad, you must re-number them prior to discovery.

  4. Use the numeric keypad buttons to set a unique ID number (1-255) and press the F1 key to save the entry.
    The Operation Saved message appears temporarily to confirm that the ID number is set.
  5. Write down the ID number and location of each SmartKey device so you can easily identify SmartKey devices when setting up SmartKey devices in the Keypad Configuration view.

Related Links

  • SmartKey display/keypad (Parent Topic)

    • Index | Prev | Next