WiFi Specifications

This section covers JACE-8000 WiFi specifications.

Disabled by default, the WiFi option (on factory configured WLAN-enabled models) can be enabled and configured to attach as a Client (CLT) to an already established IEEE 802.11 access point and network, or configured as an Access Point (ACC) to establish a new network.

Supports IEEE 802.11a/b/g/n networks
Configurable radio (OFF, ACC, CLT)
Supports WPA‐PSK, WPA2‐PSK security protocols

NOTE: The JACE-8000 does not support enterprise-level authentication (such as WPA2-enterprise), WEP authentication, or using no authentication at all.
Supports 2.4 or 5.8 GHz frequencies
- 2.4 GHz channels: 1–11
- 5.8 GHz channels: 36, 40, 44, 48,149, 153, 157, 161, and 165.
  
  NOTE: The following Dynamic Frequency Selection (DFS) channels in the 5 GHz range are not supported: 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140.
Single dual band 2.4/5.8 GHz antenna. The antenna may be remotely located using an extension cable.

WiFi Specifications

Related Links