Snmp alarm device extension properties

Common extension properties are described in the Niagara Drivers Guide documentation. The following properties are Snmp-specific properties found under the Snmp Traps component.

Alarm Class

This property displays an option list that allows you to choose the desired local AlarmClass for routing traps that are received from this device.

Last Received Time

Displays a timestamp of the last time (since station startup) that an Snmp trap message was received from the actual Snmp device represented by this SnmpDevice.

Last Received Trap

This StringElement output displays the detailed message of the last received Snmp trap message for this SnmpDevice since station startup.

Ignore Unrecognized Traps

This True or False option allows you to filter out any traps that are not recognizable based on the stored trap types for the source SnmpDevice. If this property is set to True, then the received unrecognized trap message will be disregarded (no alarms generated). If this property is disabled, then all received trap messages will be handled and routed to the specified Alarm Class whether they are recognizable or not.