Modbus Server Point Manager

This view creates and edits proxy points under a server Modbus device. It is the default view on the Points container for a ModbusSlaveDevice and ModbusTcpSlaveDevice, as well as on any points folder under those Points containers.
Figure 35.   Modbus Server Point Manager view
Image

To access one of these views, double-click the Points node in the Nav tree or right-click the component and click Views > Modbus Server Point Manager.

Column Description
Path Displays the ord path of point.
Name Displays the name of point.
Type Indicates the type of point.
Out Reports the current out value, including any point facets. This defaults to the single (configured) property value along with status for the proxy point.
Enabled Reports if the proxy point is currently enabled for communication.
Tuning Policy Name Displays the name of the tuning policy
Absolute Address Displays the actual address that uses when polling for this discrete data point from the actual Modbus device.
Fault Cause Indicates the condition at the last check.
Poll Frequency Displays the poll services that is used in the device.
Data Address Displays the address of the polled data item
Reg Type Displays the register type.
Data Type Displays the location of data.
Status Type Displays the location of points.
Bit Number Displays the bit number.
Beginning Bit Displays the bit in the register.
Number of Bits Displays the number of bits used for point.
Data Source Displays the data source.
Number Registers Displays the number of consecutive holding registers to read.
Device Facets Represents the facets learned from the point.
Facets Displays the facet value.
Conversion Displays the units to use when converting values from the device facets to point facets.
Read Value Displays the value read by the driver.
Write Value Displays the value to be written.

Buttons

Button Description
New Folder Adds new folder in the Modbus Network
New Adds a new device
Edit Edits the added devices