Configuring network properties

For any of the client Modbus networks (ModbusAsyncNetwork, ModbusTcpNetwork, ModbusTcpGateway), you need to configure network-level defaults for interpreting/supporting Modbus data. These defaults are on the property sheet of the network-level component.

Prerequisites: The network exists in the Nav tree.

If you have not already done so, navigate to the network node, right-click it and click Views > Property sheet.
The Property Sheet opens.
Configure Float Byte Order, Long Byte Order, Use Preset Multiple Register, and Use Force Multiple Coil, and click Save.

Configuring network properties

Related Links