Tcp/Ip Configuration (platDaemon-TcpIpConfiguration)
TCP/IP Configuration is the platform view you use to configure a remote host’s TCP/IP settings. Typically, you make initial settings when you first commission the controller, where this view is one step in the platform’s Commissioning Wizard. For Windows platforms, this view is read-only in Niagara 4 For more details, see TCP/IP Configuration.
To access this view of the controller expand Platform and double-click TCP/IP Configuration.
| Property | Value | Description |
|---|---|---|
| Host name | text | Identifies the name (Id) of the host platform. For a Supervisor PC this is localhost. |
| Host File | text | Displays the details of host file used. |
| Use IPv6 | check box | If checked uses IPv6. |
| DNS Domain | text | Defines the name of the network domain, or if not applicable, leave it blank. |
| IPv4 Gateway | IP address | IPv4 Gateway is the IP address for the device that forwards packets to other networks or subnets. The controller only supports one gateway for all adapters. This includes the JACE-8000 WiFi Adapter in Client mode. |
| DNSv4 Servers | IP address | Defines the IP addresses for any DNS servers. Separate each with a comma. |
| IPv6Gateway | IP address | Defines the IPv6 address for the router that forwards packets to other IPv6 networks or subnets. |
| DNSv6 server | IP addresses | Defines one or more DNSv6 server(s). |
| Interfaces | drop-down arrow | Displays the details of the interfaces. |