Register Niagara using the NRE Command

If you do not wish to use Workbench to register your Niagarainstance, you can use a command line.

Your version of Niagara is 4.13 or higher. You have a subscription key.
  1. Open a command prompt.
    On Windows, this can be done by opening the Console application in the Niagara installation, or on Linux, by opening the Niagara Shell application.

    The Administrator: Niagara Command Line window opens.

  2. Type nre -register SubscriptionLicenseKey and press enter.
    The license server connects and returns the a Verification URL and User Code:

  3. Copy the Verification URL, paste it in a browser and press Enter.
    Do not close the command prompt.
    The Enter Code window opens.

  4. Go back to the command prompt, copy and paste the User Code and click Connect.
    The Allow Access window opens.

  5. To authorize yourself as the user, click Allow.
    The You’re Connected window opens.

  6. Click Continue.
    The License Manager fetches the license attached to the host ID, and starts Workbench.