Add an SnmpNetwork to Manager
Use the following procedure to add an SnmpNetwork component under SNMP_Manager station Drivers container.
When you add an SnmpNetwork to a station, a Local Device (
) component comes with the SnmpNetwork component.
) component comes with the SnmpNetwork component.
Perform the following steps:
- Go to the Palette side bar controls.
- Open the nSnmp Module palette.
- Click OK button to add it in the Palette.
- Copy-and-paste (or drag) SnmpNetwork under the Drivers . The Name window appears.
- This brings up theNew window. Type a name in the Name field (or accept the default name).
- Click OK to add the SnmpNetwork to the station.
The SnmpNetwork appears in the Snmp Device Manager view with the name that you assigned in the previous step. The
Statusshould be{ok}andEnabledfield set totrue. The SnmpNetwork node should also appear under your Drivers node in the Nav side bar.NOTE: You must save and restart the station before the SnmpNetwork object will start network communications.