Adding the Tls Console

The section describes if yourJACE does not have Tls Console, how to add the Tls Console to the Drivers folder.

Prerequisites: Workbench is running and connected to the station.

Perform the following steps:

To open the Driver Manager, double-click the station’s Drivers container.
The AX Driver Manager view opens.
Click theNew button, select the Tls Tcp Ip Console and click OK.
The New window opens.
In the new window, edit or continue the changes and click OK.
Adds the Tls Tcp Ip Console to the Drivers folder.
To open the AX Property Sheet, right-click the TlsTcpIpConsole and click Views > AX Property Sheet.
The AX Property Sheet view opens.
In the Property Sheet, set the following properties and click Save.
- Station Name Web Supervisor
- Comm Type
- IP address for example : 10.20.1.152
- Share Tcpip Connection for example :10001
To add the Tlsn50SerialConsole (Tls250Serial , Tls350Serial ), repeat the steps 1 to 3.
For example, adding the Tls250SerialConsole
To open the AX Property Sheet, right-click the Tls250SerialConsole and click Views > AX Property Sheet.
In the Property Sheet, expand the Serial Port Config slot, set the following properties and click Save.
- Port Name
- Baud Rate
- Data Bits
- Stop Bits
- Parity
- Flow Control Mode
Reboot the stations.