JACE Hardware Scan Service

The Hardware Scan Service is supported by NiagaraAX and Niagara 4. This optional service must be added under a JACE station’s PlatformServices. The default view for the service shows a diagram of the hosting controller, identifying the location of communication ports and other features.

Figure 72. Hardware Scan Service View for the JACE-8000 with attached option modules

The diagram includes numbered callouts. The table below the diagram describes each callout (such as COM2, USB, etc.), port type, and status.

Also described are the types of option cards or option modules installed in option slots of the controller (if applicable), plus other information on features of the controller, such as the current “Wifi” status.

JACE Hardware Scan Service

Figure 72. Hardware Scan Service View for the JACE-8000 with attached option modules

Related Links