Px usage of Hardware Scan Service View
The view is based on a Px file and graphic images inside platHwScan modules. If desired, you can make this view available
on a Px view, by dragging the Hardware Scan Service onto a canvas pane.
Figure 77. Dragging the HardwareScanService onto a Px view
Making Widget selection for Hardware Scan Service View
If doing this, in the resulting “Make Widget” popup dialog select the Workbench View and Hardware Scan Service View, as shown above.
You must resize the copied widget to see all of the view. To do this, enter the correct pixel dimensions for the object by editing its properties in the PxEditor Widget Tree (right-click on HardwareScanServiceView > Edit Properties). Depending on the controller series, the overall “footprint” (pixel dimensions) varies. The approximate width and height (in pixels) for each view, including the lower “hardware reference table” area plus side scroll bar, are listed in the following table.
| Controller Series | Hardware Scan Service View Width x Height (pixels) |
|---|---|
| JACE-8000 | 640 x 987 |
| JACE-6, JACE-3E, JACE-6E | 660 x 720 |
| JACE-7 | 820 x 700 |
| JACE-603 or JACE-645 (403/545 with retrofit board) | 660 x 740 |
| JACE-NXT | 830 x 600 |
| JACE-NXS | 800 x 600 |
| SEC-J-601 | 790 x 800 |