NOTE: Your PC must meet minimum hardware/operating system requirements for the
Workbench workstation. This includes a working Ethernet adapter with TCP/IP support (browser capable). An Ethernet TCP/IP connection
to the JACE is required to install
Niagara software and establish other parameters.
For this initial Ethernet connection, you can use either:
- An Ethernet patch cable connected directly between your PC and the JACE (if your PC Ethernet port is not “auto-sensing”, you will need an Ethernet crossover cable), or
- A normal LAN connection, meaning that both your PC and the JACE are physically connected to the same Ethernet hub or switch.