kitControl-StatusNumericToDouble

This component onverts a StatusNumeric value to a Double value.

StatusNumericToDouble is available in the Conversion folder of the kitControl palette.

Figure 37. StatusNumericToDouble properties

Property Value Description

Facets

Config Facets window (defaults to units=null, precision=1)

Property	Value	Description
Facets	Config Facets window (defaults to units=null, precision=1)	Selects units and configures how the value displays: `units` defines the unit of measure of `acceleration` to `volumetric flow.` `precision defines the number of decimal places.` This configuration applies to the `In` property value.
Out	read-only number	Displays the target double value.
In	number and null definition (defaults to 0)	Displays the source status numeric value. When null is checked, the value displayed defaults to the incoming value from the device. If you remove the check mark you can configure the `In` value.

Selects units and configures how the value displays:

units defines the unit of measure of acceleration to volumetric flow.

precision defines the number of decimal places.

This configuration applies to the In property value.

Out read-only number Displays the target double value.

number and null definition (defaults to 0)

Displays the source status numeric value.

When null is checked, the value displayed defaults to the incoming value from the device. If you remove the check mark you can configure the In value.

kitControl-StatusNumericToDouble

Figure 37. StatusNumericToDouble properties

Related Links