kitControl-Ramp

This component provides a StatusNumeric Out with a linear ramping output. Properties define the Period, Amplitude, Offset, and Update Interval.

Ramp is available in the Util folder of the kitControl palette.

Property	Value	Description
Facets	Config Facets window (defaults to null units, a single decimal place, minimum=negative infinity, and maximum=positive infinity)	Selects units and configures how the value displays: `units` defines the unit of measure from`acceleration` to `volumetric flow.` `precision` defines the number of decimal places. `min` defines the lowest value allowed. `max` defines the highest value allowed. This definition applies to the `Out` property value for this component.
Out	read-only number	Reports the result of the calculation.
Period	hours minutes seconds (defaults to 30 seconds)	Defines the duration of the ramp.
Amplitude	number of decibels (defaults to 50.00)	Amplitude is height of the ramp from its lowest to highest point.
Offset	positive or negative number to two decimal places (defaults to 50.00)	Adjusts the amplitude.
Update Interval	hours minutes seconds (defaults to one second)	Specifies the time between output changes. A smaller value results in a more accurate ramp with more changes per second, while a larger value results in less precision but with less overhead.
Waveform	drop-down list	Selects the type of waveform: `Triangle` `Saw Tooth` `Inverted Saw Tooth`